This line of MARZOLF™ Two-Piece Flanges is designed to fit Polyethylene Pipe Stub Ends and Flange Adapters. MARZOLF™ Flanges save money and reduce down time by eliminating the need to cut and reweld piping when installing or replacing Lap Joint flanges behind Stub Ends and Flange Adapters. These rings are available with different corrosion resistant coatings including Zinc Electro Plate and E-Coat Epoxy.
1 - 20 of 20 | Results Per Page | View | Unit of Measure
1 

Item #

Legacy Part Number

Size

Inside Diameter (I.D.)

Outside Diameter (O.D.)

Thickness (T)

Bolt Circle (B.C.)

Number of Holes

Holes Diameter (H.D.)

Weight Each

0050G80-IPS N/A 361G80-IPS N/A 1/2 in N/A 7/8 in N/A 3-1/2 in N/A 9/16 in N/A 2-3/8 in N/A 4 N/A 5/8 in N/A 1.25 lb
0075G80-IPS N/A 360G80-IPS N/A 3/4 in N/A 1-1/8 in N/A 3-7/8 in N/A 9/16 in N/A 2-3/4 in N/A 4 N/A 5/8 in N/A 1.5 lb
01G80-IPS N/A 357G80-IPS N/A 1 in N/A 1-3/8 in N/A 4-1/4 in N/A 9/16 in N/A 3-1/8 in N/A 4 N/A 5/8 in N/A 1.75 lb
0125G80-3/4-IPS N/A 358G80-3/4-IPS N/A 1-1/4 in N/A 1.75 in N/A 4-5/8 in N/A 3/4 in N/A 3-1/2 in N/A 4 N/A 5-8 in N/A 2.5 lb
0150G80-3/4-IPS N/A 359G80-3/4-IPS N/A 1-1/2 in N/A 2 in N/A 5 in N/A 3/4 in N/A 3-7/8 in N/A 4 N/A 5/8 in N/A 3.25 lb
02G80-3/4-IPS N/A 268G80-3/4-IPS N/A 2 in N/A 2-1/2 in N/A 6 in N/A 3/4 in N/A 4-3/4 in N/A 4 N/A 3/4 in N/A 4.5 lb
0250G80-3/4-IPS N/A 182G80-3/4-IPS N/A 2-1/2 in N/A 3 in N/A 7 in N/A 1 in N/A 5-1/2 in N/A 4 N/A 3/4 in N/A 8.25 lb
03G80-4/4-IPS N/A 172G80-4/4-IPS N/A 3 in N/A 3-5/8 in N/A 7-1/2 in N/A 1 in N/A 6 in N/A 4 N/A 3/4 in N/A 10 lb
04G80-4/4-IPS N/A 149G80-4/4-IPS N/A 4 in N/A 4-5/8 in N/A 9 in N/A 1 in N/A 7-1/2 in N/A 8 N/A 3/4 in N/A 11.25 lb
05G80-4/4-IPS N/A 292G80-4/4-IPS N/A 5 in N/A 5-11/16 in N/A 10 in N/A 1 in N/A 8-1/2 in N/A 8 N/A 7/8 in N/A 12.5 lb
06G80-4/4-IPS N/A 126G80-4/4-IPS N/A 6 in N/A 6-3/4 in N/A 11 in N/A 1 in N/A 9-1/2 in N/A 8 N/A 7/8 in N/A 18.5 lb
08G80-9/8-IPS N/A 144G80-9/8-IPS N/A 8 in N/A 8-3/4 in N/A 13-1/2 in N/A 1-1/8 in N/A 11-3/4 in N/A 8 N/A 7/8 in N/A 28 lb
10G80-12/8-IPS N/A 150G80-12/8-IPS N/A 10 in N/A 10-7/8 in N/A 16 in N/A 1-1/2 in N/A 14-1/4 in N/A 12 N/A 1 in N/A 46 lb
12G80-12/8-IPS N/A 152G80-12/8-IPS N/A 12 in N/A 12-7/8 in N/A 19 in N/A 1-1/2 in N/A 17 in N/A 12 N/A 1 in N/A 66 lb
14G80-12/8-IPS N/A 184G80-12/8-IPS N/A 14 in N/A 14-3/8 in N/A 21 in N/A 1-1/2 in N/A 18-3/4 in N/A 12 N/A 1-1/8 in N/A 72 lb
16G80-12/8-IPS N/A 175G80-12/8-IPS N/A 16 in N/A 16-3/8 in N/A 23-1/2 in N/A 1-1/2 in N/A 21-1/4 in N/A 16 N/A 1-1/8 in N/A 85 lb
18G80-12/8-IPS N/A 176G80-12/8-IPS N/A 18 in N/A 18-1/2 in18-3/8 in N/A 25 in N/A 1-1/2 in N/A 22-3/4 in N/A 16 N/A 1-1/4 in N/A 88 lb
20G80-15/8-IPS N/A 177G80-15/8-IPS N/A 20 in N/A 20-1/2 in20-3/8 in N/A 27-1/2 in N/A 1-7/8 in N/A 25 in N/A 20 N/A 1-1/4 in N/A 132 lb
24G80-15/8-IPS N/A 325G80-15/8-IPS N/A 24 in N/A 24-3/8 in N/A 32 in N/A 1-7/8 in N/A 29-1/2 in N/A 20 N/A 1-3/8 in N/A 154 lb
30G80-18/8-IPS N/A 326G80-18/8-IPS N/A 30 in N/A 30-3/8 in N/A 38-3/4 in N/A 2-1/4 in N/A 36 in N/A 28 N/A 1-3/8 in N/A 249 lb
1 - 20 of 20 | Results Per Page | View | Unit of Measure
1